AVSLD HomePage
Oil seals
Bonded seals
o rings
Hygienic Seals
Hydraulic Seals
Hydraulic Seals
Wiper seals
Pneumatic Seals
guide rings
backup seals
materials list
metrology

Vee packing

Vee packing (Chevron Packing, V-Packings, Vee-packs) has long working life and can operate under adverse mechanical situations. It consists of a top header Vee packing adapter, one or more intermediate Vee packing shaped rings, and a bottom gland vee packing adapter. We make the vee packing header and gland adapters with hard plastics, and the vee packing shaped rings with elastomers or with fibre reinforced elastomers. See our materials section for a list of plastics and elastomers.

The intermediate Vee packing shaped rings are tapered to snap-fit the housing during installation, thus providing a good seal even at low pressures. This type of Vee packing can be used in double-acting hydraulic system when fitted back to back, it has outstanding abrasion and extrusion resistance, it can be made in such a way as to suit an axial housing lenghts that is both adjustable and non-adjustable.

Features of vee packing :

  • Operating pressure: up to 700 bar (can be extended with modify materials and profile)
  • Operating temperature: -30 degree celcius up to 270 degree celcius (depending on materials)
  • Reciprocating speed: up to 0.5 m/s

We offer vee packing both in metric and imperial sizes with the following types

Vee Packing Type    
Vee Packing VPR11 vee packing VPR11 is a general purpose multiple lip vee packing. You can specify the number of intermediate Vee packing for your application
Vee Packing VPR31 vee packing VPR31 is a type of vee packing that has an extra groove build at the back of the vee ring. The groove provides lubrication reservoir

 

Home | Seals | Coatings | Metallurgy | Contact us | Sales Terms

Advanced Sealing Devices Pte Ltd
CopyRight (revised version 2011)

AVSLD, or AVSLD.COM are registered trademark of Advanced Sealing Devices Pte Ltd
Trademark No. 40201610515U