AVSLD HomePage
Oil seals
Bonded seals
o rings
Hygienic Seals
Hydraulic Seals
Hydraulic Seals
Wiper seals
Pneumatic Seals
guide rings
backup seals
materials list
metrology

Guide Rings

Guide rings are commonly used in a seal design and they prevent metallic contact of glide surfaces, thereby eliminating damage to metal parts. We can make them using various materials with good dimensional precision and we provide them in split components for easy installation. The joints that we can provide are butt joints, angle joints, step joints, or any other profile of joints as specified by you.

Guide Rings

The materials that we use to make guide rings have outstanding wear and abrasion resistance and they are suitable for both piston and rod applications. There are various types of guide ring profile that we make and they are shown below:

For Both Rod and Piston Usages:

Type Cross sectional profile  
GRN1 wear rings Universal Guide Ring for either pistons or rods usage. Standard sizes are available either in imperial or metric.

For Piston usage:

Type Cross sectional profile  
GRP1 wear rings Piston Guide Ring for light to heavy industrial hydraulic applications. Standard sizes are available either in imperial or metric. Larger sizes can be made upon request. The ID of the ring has chamfered corners for ease of installation.
GRP3 wear ring Piston Guide Ring with a collar on the internal diameter.
GRP5 wear ring Piston Guide Ring with axial pressure relieve grooves and a collar on the internal diameter.
GRP8 wear ring A U-shaped cross-section piston guide ring, which can be easily fitted into the groove on the piston.

For Rod usage:

Type    
GRR1 wear rings GRR Rod Guide Ring for light to heavy industrial hydraulic applications. Standard sizes are available either in imperial or metric. The OD of the ring has chamfered corners for ease of installation.
GRR4 wear ring Rod Guide Ring with a collar on the external diameter.
GRR6 wear ring Rod Guide Ring with axial pressure relieve grooves and a collar on the external diameter.
GRR7 wear rings A U-shaped cross-section rod guide ring, which can be easily fitted into the groove on the rod.

If your system has a special profile, we can custom-make guide rings for you so that they will fit your system with precision. Some examples of guide rings we make are shown below:

Guide RingsGuide Rings

Home | Seals | Coatings | Metallurgy | Contact us | Sales Terms

Advanced Sealing Devices Pte Ltd
CopyRight (revised version 2011)

AVSLD, or AVSLD.COM are registered trademark of Advanced Sealing Devices Pte Ltd
Trademark No. 40201610515U